MHC Medical Products Easy-Touch Instrukcja Użytkownika

Easy•Touch®Glucose Monitoring SystemUser Manual

8The EasyTouch® Glucose Meter & Monitoring System is available in two different package options with the following contents:A. Your EasyTouch® Glu

9About the EasyTouch® MeterS/N:M05B13286BLOOD GLUCOSE METEREasy•Touch®For In Vitro Diagnostic Use OnlyMade in Taiwan to Specs of MHC Medical Products,

101. Display Your test results are displayed here. The large, easy to read screen guides you through the test by using numbers and symbols. 2

111. Date2. Time3. Control Solution TestAppears when doing a control solution test and marking the result as a control solution test.4. Memory Symb

126. Battery Symbol Appears when the battery is low or must be replaced.7. Blood Drop Symbol Flashes when it is ready to apply sample to Tes

13About the EasyTouch® Test StripThe EasyTouch® Test Strip is used to perform the blood glucose test in conjunction with the EasyTouch® Meter.Each st

14WARNING: Re-cap immediately & always close lid tightly.Store at 39-86°F (4-30°C). Do not refrigerate. Always store test strips inside vial.Disca

15When the battery is low, the Meter will show a warning signal. When this display appears, it is time to replace a new battery. When the low battery

16Setting Up the MeterSetting Up the Date & TimeTo turn the Meter on, rst insert a battery, then press the reset button located at the back of th

174. To set the day and move on to choose the hour setting, press the M button. (Fig.3) 5. To change the hour, press the S button. To set the hour and

See our other products at www.EasyTouchProducts.comEasy•Touch®Glucose Monitoring System

188. To set the second alarm, press the M button (yes). If you press S button (no), it will be moved on to health management alarm setting (step 11)

1910. To set the fourth alarm, press the M button (yes). If you press S button (no), it will be moved on to health management alarm setting (step 11).

20S/N:M05B13286BLOOD GLUCOSE METEREasy•Touch®For In Vitro Diagnostic Use OnlyMHC Medical Products, LLC.8695 Seward RoadFaireld, OH 45011Toll #: 877.3

21When to Perform a Control Solution TestEasy•Touch® Control Solution can be used to verify that the Easy•Touch® Glucose Monitoring system is working

22To Perform a Control Solution Test1. Make sure the Control Solution is at room temperature (59ºF to 95ºF or 15ºC to 35ºC) prior to testing. 2. Inser

235. Discard the rst drop of Control Solution and squeeze a small drop of Control Solution on a clean nonabsorbent surface (such as a clean piece of

24Comparing Control Solution ResultsThe EasyTouch® Glucose Monitoring System is functioning properly if the results fall inside the specied range pri

25Testing Your Blood Glucose LevelBefore testing blood glucose, you need the following items:1. EasyTouch® Meter 2. EasyTouch® Test Strip 3. Adjustab

26Preparing the Test Strip1. Wash hands using soap and warm water. Rinse and dry thoroughly.2. Pull out a Test Strip from the vial and re-cap the vial

27Obtaining a Blood SampleSAMPLE MAY BE OBTAINED FROM FINGER, PALM or FOREARMFor further instructions please see the insert provided with lancing devi

Important Information ...3Introduction ...

28Applying Blood Sample to the EasyTouch® Test Strip1. After obtaining a blood sample, place the drop onto the test well of the Test Strip. Blood is a

293. After the test result appears, if no further tests are performed, the Meter will automatically shut off after 3 minutes. After nishing the test,

30HI and LO Readings1. The test results range between 20 to 600 mg/dL (1.1 to 33.3 mmol/L). If a “HI” message appears on the display, your Meter has d

31Memory FeaturesThe EasyTouch® Meter automatically stores the 300 most recent blood glucose results with date and time in its memory. It also provide

32Exiting the Memory Mode1. Press the M button to turn off the meter.2. Meter will shut down automatically after 3 minutes with no further action.Note

33Transfer Test Results to a ComputerWith the EasyTouch® Glucose Monitoring System, it is easy to transfer test results to your personal computer. Fo

34For healthcare professionals using this system on multiple patient, please be aware that all items that come in contact with human blood should be h

35DISPLAY WHAT IT MEANS ACTIONDisplay MessagesSystem check for verifying that all segments of the meter are functioning.No action necessaryThe system

36DISPLAY WHAT IT MEANS ACTIONIndicate the result is HIGHER than the “HI alarm setting” of the health management.For your reference or you can change

37DISPLAY WHAT IT MEANS ACTIONMeter detects blood glucose level is lower than 20 mg/dL (1.1 mmol/L).Indicates low blood glucose level. Repeat test. If

The Control Solution Test ... 21 Testing Your Blood Glucose Level ...

38DISPLAY WHAT IT MEANS ACTIONTemperature is too high to perform the test.Repeat the test in a cooler setting (10 - 40°C or 50 - 104°F). Wait 15 minut

39DISPLAY WHAT IT MEANS ACTIONAn error message indicating a problem with the meter.Press “reset” button and check the meter again with the test strip.

40DISPLAY WHAT IT MEANS ACTIONAll testing values recorded in the memory have been shown.The setting alarm is ringing to remind of doing the blood gluc

41Other problems that may occurActionThe Test Strip has not been inserted into the meter properly.Review the instructions and re-insert the Test Strip

42Meter Operating ConditionsTemperature 10°C - 40°C(50°F - 104°F)Humidity 10-90% RHHematocrit 35 - 55%Test Sample Cap

43Limitations of the ProcedureCaution: The EasyTouch® Glucose Monitoring System is designed for in vitro diagnostic use only and is not intended to t

44Service and WarrantyMHC Medical Products, LLC cannot endorse the performance of the EasyTouch® Meter when used with Test Strips other than those des

45TRUE Lifetime WarrantyMHC Medical Products, LLC guarantees that this device will be free of defects in materials and workmanship for lifetime durati

46Customer ServiceIf you have any questions or concerns regarding this product or its operation, please call our Customer Service line or email us. W

Toll: 1.877.358.4342Web: www.EasyTouchProducts.comEmail: [email protected] Seward Road, Faireld, Ohio 45011®

3There are limitations for doing AST. Please consult your healthcare professional before you do AST.ForearmPalmAvailable Alternate Sites Testing : Pal

4Alternative site results differ from ngertip results when glucose levels are changing rapidly such as after a meal, after taking insulin, during exe

52. Talk to your doctor to see if alternate site testing is right for you. With a little bit of education, you can give your ngertips a rest and mayb

6• Low or high blood glucose readings can indicate a potentially serious medical condition. If your blood glucose reading is unusually low or high, o

7Thank you for choosing the EasyTouch® Glucose Monitoring System, the latest advancement in biosensor technology. Recognized for its ease of use and q